Brackets Fix into Studs at Any Position — Maximum Flexibility
Cantilever Aluminium Awning Sydney – Slimline 50 with Cantilever Arms
The Slimline 50 with Cantilever Arms is purpose-built for cladded walls, with brackets designed to fix directly into timber studwork behind the cladding. The cantilever arms can be positioned anywhere under the frame, giving maximum flexibility for stud positions. With its fully welded frame, sleek, low-profile look, and custom sizing up to 1065mm projection and 5 metres wide, it’s a true Slimline solution.
Ideal for cladded walls
Designed for installations where fixing directly into the studwork behind cladding is required.
Bracket flexibility with stud-mounted design
Brackets are completely independent of the awning frame and can be mounted anywhere on a cladded wall, fixing directly into the studwork behind.
Fully welded frame
Strong, durable construction with a fully welded aluminium frame
Custom-made with up to 1065mm projection and widths up to 5 metres
Tailored to suit your space and mounting needs.
Ready to Install — No Assembly Required
Every Slimline 50 with Cantilever Arms is hand-built in our Sydney workshop and supplied complete — fully welded frame, powder-coated, polycarbonate fitted, and cantilever brackets included. Brackets fix to your wall first; the awning panel then sits onto the brackets. No on-site fabrication. No loose hardware to assemble. Whether you’re a homeowner, builder, or awning contractor, your cantilever awning arrives ready to install. Most typical residential installs are done in under an hour.
Gallery
Slimline 50
Slimline 50
Frame & Fixing Details
The Slimline 50 Cantilever features high-strength brackets engineered for direct stud fixing. On clad walls, brackets penetrate the cladding and secure firmly into timber studwork, transferring the load into the building’s structure. Each bracket is made from durable, powder-coated aluminium for strength and corrosion resistance. This fixing method ensures a stable, long-lasting connection without relying on fascia or rooflines — ideal for structural integrity on cladded walls.
How It's Built
How the Slimline 50 Cantilever is Installed
The Slimline 50 Cantilever is designed for maximum flexibility and structural reliability, whether you’re fixing to brickwork or cladded walls. Its clever mounting system allows for a clean architectural finish while ensuring lasting strength and performance.
Wall Bracket Fixing
The system uses robust, powder-coated aluminium brackets that can be mounted directly onto brick walls or fixed through external cladding into the timber studwork behind. This transfers the load directly into the building’s structure, providing a safe, stable installation for both new and existing homes.
Flexible Bracket Positioning
The brackets are independent of the awning frame, meaning they can be spaced anywhere along the wall to suit the position of studs or masonry. This makes the Slimline 50 Cantilever ideal for homes with timber-framed cladding, where traditional fixed-spacing systems won’t work.
Awning Panel Mounting
The awning panel is secured at two key points — at the wall brackets and at the front of the cantilever arms. This dual connection system locks the panel firmly in place, giving it strength and stability while maintaining a slimline appearance.
High-Quality Finishes
Every Slimline 50 Cantilever is built with a fully welded aluminium frame, paired with high-grade powder-coated brackets. This not only ensures long-term durability and corrosion resistance but also creates a seamless, professional appearance.
Designed to Follow Rooflines
The Slimline 50 Cantilever sits neatly under eaves or along rooflines without interfering with gutters or architectural features. It delivers reliable protection from sun and rain while preserving the look of your home.
With its thoughtful design and versatile fixing options, the Slimline 50 Cantilever is the perfect choice for clean, practical shade solutions on both brick and cladded homes.
Installing Your Slimline 50 with Cantilever Arms — Overview
The Slimline 50 with Cantilever Arms is designed specifically for cladded walls where you need to locate fixings into the studs behind. The brackets and arms are independent of the awning panel, so each one can be positioned to hit solid timber. Installation is straightforward in three steps.
Step 1 — Fix the wall brackets and arms to the wall
Fix each wall bracket through the cladding into the timber studs behind. Attach an arm to each bracket. The arms project outward from the wall and support the awning panel. Use a spirit level to make sure each arm is at the same height before moving on.
Step 2 — Lower the awning panel onto the arms
With the arms in place, lower the awning panel down from above so the front rail seats onto the tongue at the front of each arm. Fix the front rail to the arm tongues with Tek screws, then fix the rear rail flat against the wall.
Step 3 — Seal and finish
Apply a continuous bead of exterior-grade silicone between the rear rail and the wall, and between each arm bracket and the cladding. This seals out water and gives a clean finished result
When should I choose the Slimline 50 with Cantilever Arms?
When you can’t predict where the timber studs will be behind your cladding. The Cantilever brackets are independent of the awning frame, so each bracket can be positioned anywhere along the wall — wherever the studs actually sit. The Slimline 50 with Fixed Arms has welded arms in pre-set positions, which only works if you know exactly where your studs are. If you’re unsure, or if the studs don’t fall at convenient spacings, Cantilever is the safer choice.
What's the difference between Cantilever Arms and Fixed Arms?
Same Slimline 50 frame — same 50x50mm aluminium, same powder coating, same polycarbonate sheet. The difference is how the awning attaches to the wall. Fixed Arms are welded to the frame at the factory in pre-set positions; the whole awning lifts up as one piece and fixes into studs at those exact positions. Cantilever Arms use independent brackets that fix to the wall first; the awning panel then sits on the brackets. Because the brackets are independent, they can be spaced anywhere — giving you more flexibility on cladded walls where stud positions vary.
Can the brackets be fixed to brick walls instead of cladding?
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
What sizes can the Slimline 50 with Cantilever Arms be made in?
Custom widths up to 5 metres and projections up to 1065mm. Every Cantilever Arms awning is made to size in our Sydney workshop — never standard off-the-shelf. Bracket spacing is custom-positioned to suit your stud layout (or fixing points on brick), and we can supply additional brackets for wider spans where extra support is needed.
Polycarbonate Sheeting
Premium 10mm twin-wall polycarbonate:
Sealed directly to the aluminium frame for strength and durability
High impact resistance:
Lightweight yet strong — ideal for awnings in high-wind areas
Double-sided UV protection:
Blocks 99.9% of harmful UV rays while allowing natural light through
Heat reduction properties:
Multiwall design helps lower heat buildup beneath the awning
Acoustic benefits:
Provides sound insulation, reducing noise transfer
Modern colour range:
Available in Solar White, Solar Silver, Grey, Bronze, Clear
Powder Coating Finish
Durable, long‑lasting protection:
Powder coating forms a thick, uniform layer on the finished awning, protecting against corrosion, scratching, UV damage, and weathering
Dulux-grade quality:
We use premium Dulux powders for excellent adhesion, colour retention, and fade resistance in outdoor environments
Precision application process:
Once the awning frame is fully fabricated, it’s cleaned, prepared, then coated with electrostatically charged powder before being heat-cured to create a hard, durable finish
Superior to traditional paint:
The thicker coating resists chipping, peeling, and wear better than liquid paint — ideal for outdoor applications
Wide colour & texture options:
Choose from the full Colorbond® palette, Dulux custom colours, and a variety of finishes including gloss, satin, matte,
Slimline 50
Links to Install guides and powder coat charts
Manufactured in Sydney and supplied direct – custom-made for every project, with no middlemen and no delays.